Site Information

 Loading... Please wait...
  • Image 1
  • Image 2

NAVTOOL NAVRGB+NI24PIN Nissan 2003-2010 Navigation Video Interface

$350.00 $274.99
(You save $75.01)
SKU:
NAVRGB+NI24
Condition:
New
Weight:
3.00 LBS
Availability:
In Stock
Shipping:
Calculated at checkout
Quantity:

Product Description

NavRGB 2.0 + NI24 are 100% plug and play - no wire cutting required. NavTool plug and play installation harnesses are made using OEM NISSAN / INFINITI connectors.

NavRGB 2.0 is an externally wired plug and play video interface that is installed in-line with the navigation computer and navigation screen. It works simply by interrupting the video signal from the navigation computer when it is activated, or when +12V are applied on the reverse camera wire. When this occur the navigation system video image will be replaced by the video source connected to NavRGB 2.0 video interface.

NavRGB 2.0 is a video-only input interface and does not have any audio inputs. If the vehicle does not have a factory installed AUX audio jack, then an auxiliary audio input adapter or an audio FM modulator is needed to connect audio signals from an external Audio/Video source to the factory audio system.

NavRGB 2.0 is video-in-motion enabled for off-road use, so the video image will stay on the screen even while the vehicle is in motion, however we do not recommend doing this.

Factory navigation DVD-ROM cannot play DVD movies, external video source is needed to display video on the factory navigation screen. Examples of video sources: DVD player, Game Console, Digital Media Player, HDD, iPhone, iPad, iPod Video (NavRGB 2.0 does not support iPod Controls or iPod audio).

 

Installation Information:

There should be a single connector behind the screen. If there are more then one connector present, this is probably the SCREEN MODULE, which is located right behind the screen. Do not connect the interface to the screen module, even if the connectors look the same.                                                                                                                                     

Simply unplug factory connector from back of the screen, plug in male connector of supplied NI24 plug and play harness into navigation computer, and plug in factory connector into female connector of supplied NI24 plug and play harness, then connect 12V accessory power, ground, and back-up camera wire (if installing aftermarket back-up camera). The installation is really that simple.

NavRGB 2.0+NI24 is plug and play video interface and only requires extra wiring for +12V accessory power input and chassis ground connection, this connections will not void vehicles factory warranty in most cases.

Warranty Information

1 Year Manufacturer Warranty

Product Reviews

Write Review

This product hasn't received any reviews yet. Be the first to review this product!

Click the button below to add the NAVTOOL NAVRGB+NI24PIN Nissan 2003-2010 Navigation Video Interface to your wish list.