NAVTOOL NAVRGB+GMIRC1 2006-2011 Cadillac DTS Video In Motion and Navigation in Motion Interface
NavRGB 2.0 is an externally wired plug and play video interface that is installed in-line with the navigation computer and navigation screen. It works simply by interrupting the video signal from the navigation computer when it is activated, or when +12V are applied on the reverse camera wire. When this occur the navigation system video image will be replaced by the video source connected to NavRGB 2.0 video interface.
NavRGB 2.0 is a video-only input interface and does not have any audio inputs. If the vehicle does not have a factory installed AUX audio jack, then an auxiliary audio input adapter or an audio FM modulator is needed to connect audio signals from an external Audio/Video source to the factory audio system.
NavRGB 2.0 is video-in-motion enabled for off-road use, so the video image will stay on the screen even while the vehicle is in motion, however we do not recommend doing this.
Factory navigation DVD-ROM cannot play DVD movies, external video source is needed to display video on the factory navigation screen. Examples of video sources: DVD player, Game Console, Digital Media Player, HDD, iPhone, iPad, iPod Video (NavRGB 2.0 does not support iPod Controls or iPod audio).
Vehicle Specific Installation Information:
NavRGB 2.0+GMIRC1 SSHOULD BE CONNECTED AT THE NAVIGATION COMPUTER AND NOT BEHIND THE SCREEN.
Simply unplug factory ribbon cable from the navigation screen, plug in supplied GMIRC1 plug and play ribbon cable into the navigation screen, then connect 12V accessory power, ground, and back-up camera wire (if installing aftermarket back-up camera). The installation is really that simple.
NavRGB 2.0+GMIRC1 is plug and play video interface and only requires extra wiring for +12V accessory power input and chassis ground connection, this connections will not void vehicles factory warranty in most cases.
1 Year Manufacturer Warranty
Find Similar Products by Tag
Customers also viewed