NavTool Infiniti I35 2001-2004 Navigation Video Interface

INFINITI I35 2001-2004 NAVIGATION VIDEO INTERFACE, LETS YOU
ADD DVD, REAR VIEW CAMERA OR ANY OTHER VIDEO SOURCE
TO YOUR FACTORY NAVIGATION SCREEN

Product Overview:
NavTool is not a navigation system nor does it replace your
navigation system or navigation screen. NavTool adds video
capabilities to your factory navigation screen

UNIVERSAL NAVTOOL wire cutting required. The NavTool
converter comes with a universal wire harness that requires
4 wires to be cut behind navigation computer in the trunk of the car.

All our video interfaces come with 2 video input, video 1
is dedicated for any video source, video 2 is dedicated for
back up camera. When you put your car in reverse screen you
will automatically see reverse camera on your navigation
screen (back-up camera over rides either DVD or navigation)

NavTool is an externally wired plug and play video
interface that is installed inline of the navigation
computer navigation screen.
It works simply by interrupting the video signal from your navigation computer when you activate
the interface or activate 12V on the reverse camera line.
When this occurs the navigation system video
image will be replaced by the video input that is connected
to the NavTool module.

NavTool is a video only input interface module, which means
an FM modulator, FM transmitter or an auxiliary audio input
interface adapter needs to be used to connect the audio
signal from your external AV source to your audio system,
if your vehicle does not have an auxiliary input already
available. NavTool is video-in-motion enabled, so the video
image will stay on the screen even with the car in motion,
however we do not recommend doing this.

You factory navigation player cannot play DVD movies, you
will need to install external video source such as DVD
player, game console, or iPod video.

Vehicle Specific Installation Information:


THIS INTERFACE SHOULD BE CONNECTED AT THE NAVIGATION
COMPUTER AND NOT BEHIND SCREEN.

This kit includes the NavTool module and a universal wiring
harness that plugs into the navigation computer in the
trunk of a car. You can view a photo of the wiring harness
on top of this page.

Simply cut 4 wires and connect universal wiring harness
provided with the NavTool module. Then connect 12V power,
ground, and backup camera wire if installing back-up
camera. The installation is really that simple.
Since the unit is plug and play and only requires extra wiring for
12V and ground, it will not void your vehicles factory
warranty in most cases.

Our product is backed with a no questions asked 12 month warranty.