Navtool 2003-2011 Volvo Navigation Video Interface

NavTool is not a navigation system nor does it replace
your navigation system or navigation screen.
NavTool adds video capabilities to your factory navigation screen

UNIVERSAL NAVTOOL wire cutting required.
The NavTool converter comes with a universal wire harness
that requires 3 wires to be cut behind
navigation computer in the trunk of the car.

All our video interfaces come with 2 video input, video 1
is dedicated for any video source, video 2 is dedicated for back up camera.
When you put your car in reverse screen you will automatically
see reverse camera on your navigation screen
(back-up camera over rides either DVD or navigation)

NavTool is an externally wired plug and play video
interface that is installed inline of the navigation
computer navigation screen.
It works simply by interrupting the video signal from your
navigation computer when you activate the interface or
activate 12V on the reverse camera line.
When this occurs the navigation system video image
will be replaced by the video input that is connected to the NavTool module.

NavTool is a video only input interface module, which means
an FM modulator, FM transmitter or an auxiliary audio
input interface adapter needs to be used to connect
the audio signal from your external AV source to your audio system,
if your vehicle does not have an auxiliary input already available.
NavTool is video-in-motion enabled, so the video image
will stay on the screen even with the car in motion,
however we do not recommend doing this.

You factory navigation player cannot play DVD movies,
you will need to install external video source such as DVD
player, game console, or iPod video.

Vehicle Specific Installation Information:

THIS INTERFACE SHOULD BE CONNECTED AT THE NAVIGATION
COMPUTER AND NOT BEHIND SCREEN.

This kit includes the NavTool module and a universal wiring
harness that plugs into the navigation computer in the trunk of a car.
You can view a photo of the wiring harness on top of this page.

Simply cut 3 wires and connect universal wiring harness
provided with the NavTool module.
Then connect 12V power, ground, and backup camera wire if
installing back-up camera. The installation is really that simple.
Since the unit is plug and play and only requires extra
wiring for 12V and ground, it will not void your vehicles
factory warranty in most cases.

Our product is backed with a no questions asked 12 month warranty.

Compatible Vehicles:
VOLVO C30 2007-2010
VOLVO C70 2006 - 2010
VOLVO S40 2004 - 2010
VOLVO S60 2003 - 2009
VOLVO S80 2003 - 2010
VOLVO V50 2004 - 2010
VOLVO V70 2003 - 2010
VOLVO XC60 2010 - 2011
VOLVO XC70 2003 - 2010
VOLVO XC90 2003 - 2010